NANODIY technology is based around the production of textile dye and binder which is activated by means of a color stabilizer. In contact with the stabilizer and the effect of temperature, the binders are activated and bind the pigments to the ground. NANODIY technology allows the binding of the color on cotton with very high adhesion and cost-effective production.
The technology can be used multiple times and with a wide range of color printers.
It takes 30 seconds to print and 30 seconds to transfer the expression by means of heat press on the garment.
It's printed on transfer paper with very low absorption layer, which allows the retention of color dots on the surface of the paper.
Very low price per A4 sheet with ink, transfer paper and stabilizer
Stabilizes the pressure on the transfer paper and improves the transmission of pressure on the garment. Color pigment is bound using Nano-binders to the material.
Base of NANODIY ink is water. In the application of colors to the surface of the garment, the transfer takes place at a temperature of 190 ° C.
The Print with nanodiy technology is extremely easy. Only Nanodiy color, nanodiy paper, nanodiy stabilizer and a printer is required to create it. With a simple system that brings a number of advantages, create your imprint on almost every garment, in a few minutes.
For the desired pressure, you can use any graphics format – JPG, PNG, .ai, .cdr, .psd, .pdf …
Before printing, it is not necessary to convert the graphics or the color settings.
We can recommend a best printer and settings to print with Nanodiy technology.
The term graphics with up to 90% saturation takes about 15 seconds, and it is printed on Nanodiy paper.
After printing on Nanodiy paper stabilizer must be applied in a thin layer.
Prepared paper, lay with printed graphics down to the desired object and presses with press at 190 °C for about 30 seconds.
The development of nanotechnology in the production of ink led to new possibilities for the connection of the textile printing ink on the fabric. In contrast to the sublimation, in which the color pigments with polyester fabric are tied, the process of cotton is much more demanding. So has a binder that is the biggest problem of all inks manufacturer, be added.
The basis of the NANODIY paint is water. When applying the paint to the surface of the garment, the application process takes place at a temperature of 190 ° C. A by-product in the application is water vapor. Pigment, binder and base colors are eco-friendly and does not produce allergic reactions.
NANODIY color is printed on transfer paper with very low absorption layer, which allows the retention of dots of color on the surface of the paper. The structure of the paper and the low surface tension of the ink droplets enables a very accurate positioning of the ink drops on the transfer paper. Precise positioning falls within thousandths of a millimeter. The structure of the transfer paper allows very accurate pressure smallest details.
To do it, there must be a binder that is the biggest problem of all inks manufacturer. The chemical processes that occur during the mixing of the binder and ink, to stop and to be activated at a given time.
NANODIY technology is based on the production of textile dyes with a binding agent activated by the aid of a color stabilizer. The binding agent particles, mixed with the color pigment, are inactive. In contact with the color stabilizer and the effect of temperature, the binders are activated and bind the color pigment on the substrate to which they are applied. NANODIY technology allows color to be bonded to cotton fabrics with very high stability.